BKRTR - RUST-O-LASTIC SILICONE ALKYD GLOSS COATING

  • MSDS: BKRTR
  • Manufacturer: M A BRUDER AND SONS INC
  • Product Name: RUST-O-LASTIC SILICONE ALKYD GLOSS COATING
  • National Stock Number: 8010-00N016152
Product Identification

Product ID:RUST-O-LASTIC SILICONE ALKYD GLOSS COATING
MSDS Date:05/10/1988
FSC:8010
NIIN:00N016152
MSDS Number: BKRTR

Responsible Party
M A BRUDER & SONS INC
600 REED ROAD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100/215-853-2051

Info Phone: 215-353-5100

Cage: 85519

Contractor
M A BRUDER & SONS INC
600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

Ingredients

PETROLEUM NAPHTHA-MEDIUM

CAS: 65742-88-7

Fraction By Weight: 5-10%


POSS EXPOS TO SOLV OR CHEM

RTECS: 9999999ZZ


VARNISH THAT PRESENT LG AIR-TO-OIL INTERFACES WILL

RTECS: 9999999ZZ


PLACED IN CLOSED METAL CONTAINER. KEEP OUT OF REACH

RTECS: 9999999ZZ


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 11-32%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 22-34%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:CAN CAUSE ANESTHETIC RXN.
POSS ACUTE NERVOUS SYS DEPRESS OR IRRIT OF RESP TRACT CHARACTERIZED
BY FOLLOWING STEPS:HDCH, DIZZ, STAGGERING GAIT, CONFUSION, UNCON &
COMA. NOTE:INTENTIONAL MISU SE BY DELIBERATELY CONC & INHALING
CONTENTS MAY BE HARMFUL OR FATAL. REPORTS HAVE ASSOC
RPTD/PRLNGD(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OCCUPATIONAL OVEREXPOS TO SOLVS W/PERM
BRAIN & NERVOUS SYS DMG. SKIN/EYE:PRIMARY IRRIT.
CHRONIC:INHAL/SKIN/EYE:EFTS OF EXCESSIVE CHRONIC EXPOS HAVE NOT
BEEN FULLY INVESTIGATED. RPTD HNDLG OR USE MAY PRESENT ADDTNL HAZ.
EXERCISE DUE CARE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE FROM EXPOS. RESTORE BREATHING. KEEP WARM/QUIET.
CALL MD. EYE:FLUSH IMMED W/LG AMTS OF WATER FOR AT LEAST 15 MIN.
CALL MD FOR SPECIAL MEDICAL TREATMENT. SKIN:WASH AFFECTED AREA
W/SOAP & WA TER. REMOVE CONTAMINATED CLTHG. CALL MD. INGEST:GET MD
IMMED .

Fire Fighting

Flash Point Method:SCC
Flash Point:103F,39C
Extinguishing Media:NATL FIRE PROT ASSOC CLASSIFIES BURNING LIQ TO BE
CLASS B FIRES. ANY ANY APPRVD CLASS B FIRE EXTING OR EXTING(SUPP
DATA)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE. IF WATER USED, FOG NOZZLES
PREFERABLE. WATER MAY BE USED TO COOL (SUPP DATA)
Unusual Fire/Explosion Hazard:COMBUST. KEEP CNTNRS TIGHTLY CLOSED.
ISOLATE FROM HEAT & FLAME. CLOSED CNTNRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. APPLICATN TO HOT SURF REQ (SUPP DATA)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME AND HOT
SURFACES). VENTILATE AREA AND AVOID BREATHING VAPORS. CONTAIN AND
REMOVE WITH INERT ABSORBENT MATERIAL USING NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE IN SUN OR ABOVE 120 F.
OSHA STORAGE CATEGORY: STORE LRG QUANTITIES IN BLDGS DESIGNED FOR
STORAGE OF FLAM OR COMBUSTIBLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT WELD OR FLAME CUT W/O
PROPER VENT TO INSURE AREA IS FREE OF FLAMM VAPS. DO NOT CUT,
PUNCTURE OR WELD ON/NEAR CNTNR. ENTRANCE INTO CLOSED STOR TANKS-USE
APPROP NIOSH/MSHA APPRVD RESP OR AIR LINE FOR (SEE ING 4)

Exposure Controls

Respiratory Protection:APPROVED CHEMICAL MECHANICAL FILTER RESPIRATOR
DESIGNED TO REMOVE A COMBINATION OF PARTICULATE AND VAPORS.
(NIOSH/MSHA TC 23C OR EQUIVALENT)
Ventilation:ALL APPLICATN AREAS SHOULD BE VENTED I/A/W OSHA REG 29 CFR
1910 DURING USE & UNTIL AREA IS FREE OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:USE PROTECTIVE SKIN CREAM. WEAR CLEAN
UNCONTAMINATED CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:AGENT MAY BE USED FOR FIREFIGHTING PURPOSES, E.G.CO*2, DRY
CHEM & FOAM. FIRE FIGHT PROC:CLOSED CNTNRS TO PVNT PRESS BUILD-UP &
POSS AUTO IGNIT/EXPLOS WHEN EXPOSED TO EXTREME HEAT. EXPLO H
AZ:SPECIAL PRECAUTION DURING EMER COND.OVEREXPOS TO DECOMP PRODS
MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED (SEE ING 4)

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Density:HEAVY
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:49-54

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES AND SELECTED AMINES.
Stability Condition to Avoid:HIGH TEMPERATURES AND FLAME.
Hazardous Decomposition Products:SMOKE, ACRID FUMES, CO AND CO*2.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.